Descargar Imprimir esta página

epico 103788 Manual página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
3IN1 MAGNETIC WIRELESS CHARGING STAND
INSTRUCTION MANUAL
Thank you for purchasing our product, and we hope you will enjoy it.
Technical parameters
3in1 Magnetic Wireless Charging Stand
USB-C input: 9 V/3 A, 12 V/2,5 A
USB-A output: 5 V/2 A
Total wireless output: max. 40 W
Charging power (iPhone): 15 W, 10 W, 7,5 W, 5 W
Charging power (Apple Watch): 3 W
Charging power (AirPods): 3 W
Charging distance (wireless charging): <10 mm
Material: zink alloy + ABS, aluminium, rubber coating
Product dimensions: 175 x 120 x 85 mm
Weight: 197 g
Product description
1. Magnetic charging pad for iPhone
2. Magnetic charging pad for Apple Watch
3. USB-C input
4. USB-A output
5. Charging
6. LED indicator
Package content
1x Wireless charging base
1x 18 W Quick Charge AC adapter
1x USB-C to USB-C cable
1x instruction manual
Instruction manual
Use the supplied USB-C cable to connect the charging cradle to the supplied AC adapter, and plug the power cord into a properly
grounded AC outlet.
Note: The charging cradle allows you to charge several devices at the same time, either two iPhone mobile phones and one Apple
Watch smart watch (in which case keep in mind that the power of the bottom charging pad is only 3 W), or one Apple Watch smart
watch, one mobile phone iPhone and one smart AirPods case.
Wireless charging of the iPhone mobile phone
1. Place the iPhone in the center of the magnetic pad of the iPhone (horizontally or vertically). It automatically attaches it thanks to
strong magnets.
2. Charging starts automatically. The LED indicator lights up red. You can monitor the charge status on the display depending on the
model.
Wireless charging of Apple Watch smart watch
1. Place the Apple Watch in the center of the magnetic pad for the Apple Watch. It automatically attaches it thanks to strong
magnets.
2. Charging starts automatically. The LED indicator lights up red. You can monitor the charge status on the display depending on the
model.
Charging pad
The charging pad is used to charge another iPhone mobile phone or AirPods smart charging cases. Put the device you want to charge
onto the charging pad. LED indicator lights up green.
Note: If you remove the device from the charging area, the LED indicator lights up red. If you are not charging any devices, the LED
indicator will light red.
Safety instructions
Carefully read the safety and operating instructions below. This will prevent possible damage or damages to the device. The
manufacturer accepts no liability for damage caused by improper use of this device.
1. Keep the product and its accessories out of the reach of children.
2. This product is intended for household use only.
3. Be careful not to drop, intentionally or unintentionally break, bend, dent, or otherwise deform the charging base, adapter, or
cable, as this may interfere with proper operation.
4. Do not disassemble or otherwise interfere with the product or its accessories. It does not contain any parts, which could be
serviced by the user in the event of a malfunction.
5. Do not expose the product or its accessories to moisture or immerse them in liquids. Do not expose them to dripping or splashing
water. Do not place water containers, such as vases, on them.
6. Do not place a bank card or other cards or chips that operate wirelessly too close to it. They could be irreparably damaged.
7. Keep a distance of at least 20 cm between implanted medical devices (e.g. pacemakers) and wireless charging pads to prevent
possible interference with the medical device.
8. Do not use covers containing metal when charging, as this may slow down or interrupt charging completely.
9. Do not expose the product or its accessories to direct sunlight. It is forbidden to place sources of open fire on them, such as
burning candles.
10. Never throw the product or its accessories in a fire.
11. Do not use or store the product or its accessories near substances / objects that could ignite, flammable or explosive substances,
etc.
12. Do not leave the product or its accessories unattended while it is in operation.
13. It is forbidden to use a damaged product or its accessories.
14. Both the charging base and the AC adapter may become hot during charging and use. Please pay close attention to its possible
extreme heating, which may indicate a problem with the charging circuit of the electronic device. In this case, unplug the charging
base or AC adapter immediately and consult a qualified technician. Provide sufficient free space around the product for proper air
circulation. Do not use it on a fabric surface (e.g. a tablecloth).
15. Never cover the product.
16. Before cleaning, make sure that the AC adapter is unplugged from the AC outlet.
17. Use only a dry cloth for cleaning. It is forbidden to use water, chemicals, solvents, petrol, etc. for cleaning.
18. Store the product and its accessories in a dry and well-ventilated place, out of reach of children or pets. Do not place any objects
on them during storage.
Disclaimer
The manufacturer accepts no liability for any damage to the mobile device caused by incorrect use of this product.
Apple Watch and AirPods are trademarks of Apple Inc., a company registered in the USA and other countries.
This symbol on the product or in the accompanying documentation indicates that the product must not be considered
a regular municipal waste and must be disposed of in accordance with local regulations. Pass thi product for
environmentally safe disposal. Proper disposal of this product protects the environment. For more information, contact
your local municipal waste disposal office, the nearest collection point or your dealer.
This product complies with all the essential requirements of the EU directives that apply to it.
Class II – Protection against electric shock is provided by double or reinforced insulation.
This symbol indicates that the product is intended for indoor domestic use only. The product is not intended for outdoor
use.
Quick Charge AC Adapter
Input: 100–240 V ~ (50-60 Hz), 0,6 A
Output: USB-A 3,6–6,5 V/3 A; 6,5–9 V/2 A; 9–12 V/1,5 A
Material: ABS + PC plastic
Adapter dimensions: 45 x 88 x 26 mm
Weight: 62 g
USB-C cable
Material: PVC
Cable length: 1 m
Weight: 20 g
4.
1.
EN
3.
2.
5.
6.

Publicidad

loading