Lindy 21710 Manual Del Usuario página 7

User Manual English
Connecting a source and a local console
Before powering on the unit, please connect a source such as a PC, Server or KVM Switch on Server
Console ports using a USB Type A Male to Type B Male cable (1) and one of the three video inputs
using a VGA, DisplayPort or HDMI Male to Male cable (2).
If needed, please connect a mouse, keyboard (1) and monitor (2) to Local Console ports to add an
additional console. Both the LCD console drawer and the local console can be used at the same time to
control the source.
Please Note: the same type of video interface has to be used on both Local and Server consoles.
If needed, connect a USB device (mouse, keyboard or mass storage) to the USB Type A Female port on
the front panel of the unit.