Trisa electronics 9506.13 Manual Del Usuario página 41

7.5 Automatic self-cleaning and drying 7.5 Automatic self-cleaning and drying 7.5 Automatic self-cleaning and drying
Entering the self-drying mode ⓱
Entering the self-drying mode ⓱ Entering the self-drying mode ⓱
The hard floor cleaner is equipped with a self-drying mode, capable of drying the brush roll.
The hard floor cleaner is equipped with a self-drying mode, capable of drying the brush roll. The hard floor cleaner is equipped with a self-drying mode, capable of drying the brush roll.
To enter the self-drying mode: To enter the self-drying mode: To enter the self-drying mode:
1. Put the hard floor cleaner on the charging stand Ⓡ.
1. Put the hard floor cleaner on the charging stand Ⓡ. 1. Put the hard floor cleaner on the charging stand Ⓡ.
2. Press and hold the mode button Ⓐ for three seconds.
2. Press and hold the power button Ⓑ for three seconds. 2. Press and hold the power button Ⓑ for three seconds.
symbol shows on the display Ⓔ. symbol shows on the display Ⓔ. symbol shows on the display Ⓔ.
A A A
Alternatively, to avoid using self-drying mode:
Alternatively, to avoid using self-drying mode: Alternatively, to avoid using self-drying mode:
1. Pinch the brush roll Ⓞ release buttons Ⓜ and remove the brush roll Ⓞ. 1. Pinch the brush roll Ⓞ release buttons Ⓜ and remove the brush roll Ⓞ. 1. Pinch the brush roll Ⓞ release buttons Ⓜ and remove the brush roll Ⓞ.
2. Put the brush roll Ⓞ in the accessory holder Ⓠ and let the brush roll Ⓞ dry completely.
2. Put the brush roll Ⓞ in the accessory holder Ⓠ and let the brush roll Ⓞ dry completely. 2. Put the brush roll Ⓞ in the accessory holder Ⓠ and let the brush roll Ⓞ dry completely.
Entering the self-cleaning mode ⓲
Entering the self-cleaning mode ⓲ Entering the self-cleaning mode ⓲
The hard floor cleaner is equipped with a self-cleaning mode, capable of cleaning the brush roll. The hard floor cleaner is equipped with a self-cleaning mode, capable of cleaning the brush roll. The hard floor cleaner is equipped with a self-cleaning mode, capable of cleaning the brush roll.
To enter the self-cleaning mode: To enter the self-cleaning mode: To enter the self-cleaning mode:
1. Put the hard floor cleaner on the charging stand Ⓡ.
1. Put the hard floor cleaner on the charging stand Ⓡ. 1. Put the hard floor cleaner on the charging stand Ⓡ.
2. Make sure the water tank Ⓗ is filled, and the battery Ⓙ capacity is above 10%.
2. Make sure the water tank Ⓗ is filled, and the battery Ⓙ capacity is above 10%. 2. Make sure the water tank Ⓗ is filled, and the battery Ⓙ capacity is above 10%.
3. Press the self-cleaning button Ⓒ.
3. Press the self-cleaning button Ⓒ. 3. Press the self-cleaning button Ⓒ.
symbol shows on the display Ⓔ. The hard floor cleaner dispenses water and turns the brush roll to clean
symbol shows on the display Ⓔ. The hard floor cleaner dispenses water and turns the brush roll to clean symbol shows on the display Ⓔ. The hard floor cleaner dispenses water and turns the brush roll to clean
A A A
itself. itself. itself.
After the self-cleaning is completed, the hard floor cleaner starts the self-drying mode After the self-cleaning is completed, the hard floor cleaner starts the self-drying mode After the self-cleaning is completed, the hard floor cleaner starts the self-drying mode
automatically.
automatically. automatically.
80 80 80 Instructions for use TRISA Hard Floor Cleaner
Instructions for use TRISA Hard Floor Cleaner Instructions for use TRISA Hard Floor Cleaner
8 Cleaning and maintenance 8 Cleaning and maintenance
8.1 Cleaning the hard floor cleaner 8.1 Cleaning the hard floor cleaner
1. Clean the hard floor cleaner using a damp cloth. 1. Clean the hard floor cleaner using a damp cloth.
2. Dry the hard floor cleaner using a cloth. 2. Dry the hard floor cleaner using a cloth.
WARNING! Do not use any solvent based cleaners. WARNING! Do not use any solvent based cleaners.
8.2 Cleaning the brush roll and vacuum tunnels 8.2 Cleaning the brush roll and vacuum tunnels
A pipe cleaner is provided with the hard floor cleaner. Use it to clean out any debris from the vacuum tunnel. A pipe cleaner is provided with the hard floor cleaner. Use it to clean out any debris from the vacuum tunnel.
1. Remove the waste water tank Ⓧ by pressing the waste release button Ⓘ. 1. Remove the waste water tank Ⓧ by pressing the waste release button Ⓘ.
2. Pull on the cover release tab Ⓛ and remove the brush roll cover Ⓟ. ⓳ 2. Pull on the cover release tab Ⓛ and remove the brush roll cover Ⓟ. ⓳
3. Pinch the brush roll release buttons Ⓜ and remove the brush roll Ⓞ. ⓴ 3. Pinch the brush roll release buttons Ⓜ and remove the brush roll Ⓞ. ⓴
4. Clean the ball bearings and cut away any tangled hair using the provided cleaning brush AA. 4. Clean the ball bearings and cut away any tangled hair using the provided cleaning brush AA.
5. Clean the floor nozzle using a cloth. 5. Clean the floor nozzle using a cloth.
22 22
6. Clean the floor nozzle and vacuum tunnel with the provided pipe cleaning brush Ⓩ . 6. Clean the floor nozzle and vacuum tunnel with the provided pipe cleaning brush Ⓩ .
7. Push the brush roll Ⓞ back into the hard floor cleaner until you hear a click. 7. Push the brush roll Ⓞ back into the hard floor cleaner until you hear a click.
8. Put the brush roll cover Ⓟ back onto the hard floor cleaner. 8. Put the brush roll cover Ⓟ back onto the hard floor cleaner.
8.3 Removing the handle 8.3 Removing the handle
To remove the handle: To remove the handle:
25 25
1. Hold the handle Ⓖ tightly. 1. Hold the handle Ⓖ tightly.
2. Pull the handle Ⓖ up while pushing a screwdriver into the hole below the handle Ⓖ. 2. Pull the handle Ⓖ up while pushing a screwdriver into the hole below the handle Ⓖ.
Instructions for use TRISA Hard Floor Cleaner Instructions for use TRISA Hard Floor Cleaner
21 21
23 23
24 24
81 81