Publicidad
Idiomas disponibles
Idiomas disponibles
Screwdriving
This screwdriver is not designed to completely drive a screw
into a surface. It is recommended that you drive the screw
using power and finish securing the screw manually, as you
would using a standard screwdriver.
1. Grasp the screwdriver as shown in Fig. F
2. To operate the screwdriver in a forward, clockwise
direction, press and hold the forward button
3. Release pressure from the button and the tool will stop.
4. To operate the screwdriver in a reverse, counterclockwise
direction, press and hold the reverse button
5. Release pressure from the button and the tool will stop.
NOTE: For best performance, #8, 2" and smaller fasteners are
recommended, or screw into pre-drilled holes.
NOTE: When the screwdriver is activated by pressing the
forward
2
or reverse button
automatically illuminate.
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, keep away from the forward and reverse
buttons while making any adjustments or removing/
installing attachments or accessories. An accidental
start‑up can cause injury.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved eye
protection when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non‑metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Accessories
WARNING: Since accessories, other than those offered
by PROTO , have not been tested with this product, use
of such accessories with this tool could be hazardous.
To reduce the risk of injury, only PROTO recommended
accessories should be used with this product.
Recommended accessories for use with your tool are available
at extra cost from your local dealer or authorized service
center. If you need assistance in locating any accessory,
please contact PROTO Industrial Tool Co., 701 East Joppa Road,
Towson, MD 21286, call 1‑800‑800‑8665 or visit our website:
www.protoindustrial.com..
Repairs
The battery pack is not serviceable. There are no serviceable
parts inside the tool or battery pack.
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement, when applicable) should
be performed by a PROTO factory service center or a
PROTO authorized service center. Always use identical
replacement parts.
2
.
3
.
3
, the LED worklight
4
will
Register
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
• CONFIRMATION OF OWNERShIP: In case of an
insurance loss, such as fire, flood or theft, your registration
of ownership will serve as your proof of purchase.
• FOR YOUR SAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Three Year Limited Warranty
PROTO will repair or replace, without charge, any defects
due to faulty materials or workmanship for three years from
the date of purchase. This warranty does not cover part
failure due to normal wear or tool abuse. For further detail
of warranty coverage and warranty repair information,
visit www.protoindustrial.com or call 1-800-800-8665. This
warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
In addition to the warranty, PROTO tools are covered by our:
90 DAY MONEY BACK gUARANTEE
If you are not completely satisfied with the performance of
your PROTO tool for any reason, you can return it within 90
days from the date of purchase with a receipt for a full refund
– no questions asked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARNINg LABEL REPLACEMENT: If your warning
labels become illegible or are missing, call 1-800-800-8665 for
a free replacement.
ENgLISh
7
Publicidad
