aSSeMBLe The BLaDe MounT aSSeMBLY
STeP 3:
(See FIGure 3)
• Attach four pivot brackets (5) to the blade mount
assembly (7) using four hex bolts (G) and Nylock hex
nuts (N).
• To help align the pivot brackets (5), temporarily insert
the pivot shaft (8) through the holes in the pivot
brackets.
• Remove the pivot shaft (8) once the pivot brackets (5)
are securely attached to the blade mount assembly (7).
5
N
7
8
5
5
G
FIGure 3
aTTach The BLaDe MounT aSSeMBLY To
The hITch MounT aSSeMBLY
STeP 4:
(See FIGure 4)
• Insert the blade mount assembly (7) into the hitch
mount assembly tube (6).
• Secure with a clevis pin (I) and a hair cotter pin (K).
• Insert the square plugs (ZZ) into the blade mount
assembly (7).
ZZ
6
K
6
7
I
FIGure 4