RIB TX 1CH Manual De Instrucciones página 3

TX 1CH, 6CH, 12CH WIRELESS Transmitter
1. Description
TX 1CH, 6CH, 12CH WIRELESS are transmitters with frequency 433,92 MHz, with the innovative variable coding.
This coding offers more than 18 billions of billions combinations, granting security, absence of unwanted activations and operation with 3 buttons OPEN, STOP, CLOSE.
Combining it with the control unit MINI WIRELESS it is possible to obtain a complete and easy to install system, improving comfort and home control.
Led indicator of selected
channel and setup menu
OPEN function button
STOP function button
CLOSE function button
CHANNEL SELECTION,
TRANSMISSION and
SETUP MENU buttons
2. Transmitter screen print
M D C
TX 1CH screen print
Indication of the selected transmission channel.
1 12
During Transmission, the led corresponding to the selected channel will blink quickly when battery level is optimal. If blinking is slow, the charge of
the batteries is low and they must be replaced.
Group function :
At the passage from the channel 12 (6 for the TX 6CH version) to the channel 1 or vice versa, the group function has been introduced.
This function is signalled by the contemporary switching on of all the led of the various channels.
The pressure of a control key (UP – STOP – DOWN) will activate the function sending automatically the selected control in sequence for 1,5 sec. on all the channels.
The channel which is transmitting switches on with high luminous intensity, while the others blink with very low luminous intensity to indicate that you are utilizing this
function.
The pressure of any other key stops the transmission sequence.
MENU Option
M
This function allows the opening of memory in ALL the devices within
the range of the transmitter, where the selected CHANNEL has been
previously learnt.
D
This function allows deleting the SINGLE SELECTED CHANNEL from
the memory of ALL the devices within the range of the transmitter,
where the selected CHANNEL has been previously learnt.
3. Setup menu
• TX 1CH
: the setup menu can be entered pushing at the same time the OPEN and CLOSE buttons for 10 se
Push simultaneously the
OPEN and CLOSE buttons
1
A
After 5 sec
M
Access to MENU is signalled
by the lighting of the M led
3 4
2 5
6
M D C A
TX 6CH screen print
C
This function allows cancelling the TRANSMITTER from the memory
of ALL devices within the range of the transmitter, where any of the
channels had previously been learnt.
A
This is an AUXILIARY function
Select option with OPEN
and CLOSE buttons
Led indicator of selected
channel and setup menu
OPEN function button
STOP function button
CLOSE function button
3 4
2 5
1
9 10 11
8
7
M D C A
TX 12CH screen print
c.
Push once
D
6
12