LEXMAN 3276007387650 Manual De Instrucciones página 51

UNPAIRING THE RECEIVER
To remove the receiver from its network, do a Reset of the receiver (see «procedure for
resetting the receiver») or via the Enki Application.
PROCEDURE FOR RESETTING THE RECEIVER
THE RECEIVER MUST BE CONNECTED AND POWERED ON.
1 - Press the button on the receiver for more than 5 seconds. The LED fl ashes
orange.
2 - Press the button again (short pulse) to confi rm the reset. If the reset is
successful, the LED fl ashes alternately in red and green, then fl ashes in
orange. Repeat if necessary.
3 - Your receiver is now back to its original confi guration and ready to join a new
network.
For any information contact Enki support directly on the application in
Need advice or information?
the «contact» section.