Descargar Imprimir esta página

Garland SET KEEPER40V 552 Manual De Instrucciones página 36

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

English
- Avoid completely discharging the battery. The
life of the battery will be longer if you recharge
the battery when you notice that the power
of your machine decreases and do not let it run out
completely.
- Always recharge the battery after using the
machine. Do not store the battery discharged or at
half load.
- Always recharge the battery inside your house
and garage to preserve the battery and charger
from moisture and inclement weather.
- Recharge the battery at temperatures between 5º C
and 40º C.
- Always keep the battery away from water, damp
areas, heat sources and chemicals.
6.7. INSTALL THE BATTERY
Install the battery by sliding it
along the rails
until it is connected securely
in the
machine.
To remove the battery, press the tab.
7. MAINTENANCE AND SERVICE
Carry out random inspections on the machine to
ensure an efficient use of the machine. For a complete
maintenance take the machine to your nearest service
agent.
It is always necessary to stop the machine, wait
for the blades to stop before carrying out any cleaning
or maintenance work on the machine and when
transporting the machine.
Never attempt to carry out any maintenance work
on the machine if the machine is running. Carry out
all maintenance work on a flat surface and on a clear
surface.
Remove the battery before performing any operation
on the machine. Read the instruction manual before
performing any operation on the machine.
WARNING !: Do not modify the machine or the cutting
elements. Improper use of these elements can cause
SERIOUS PERSONAL INJURY OR DEATH.
Use only suitable spare part for this machine
in order to obtain an adequate performance of the
machine. You can find this spare part in the official
dealers of the machine. The use of other spare parts
can cause accidents to the user, the people around
and the machine.
7.1. MAINTENANCE AFTER USAGE
Carry out the following maintenance work once
you finish your task to guarantee that the machine
functions correctly next time.
7.1.1. GENERAL CHECKS
Check the battery status
7.1.2. CLEANING
Attention! Always clean the machine after use.
Not cleaning the machine adequately will result
in damages to the machine and the machine will
work less. Wherever possible, clean the machine
immediately after working with it.
Maintain your machine clean and in good conditions.
Do not clean the engine with water. The electric
engine could stop functioning.
Clean the covers of the machine with a damp cloth.
Do not use petrol, detergents, water or any other liquid
to clean the machine.
36/124

Publicidad

loading