Naterial BAELO TEAK Manual De Instrucciones página 45

Idiomas disponibles

Cleaning

Wood is a living material that is very aesthetic, warm and e cient but it requires maintenance. it

is recommended to maintain your wooden garden furniture twice a year. A ﬁrst time in spring and

then at the end of the summer. The cleaning is done with a brush and warm soapy water. But not

with just any soap. The use of black soap or Marseille soap is preferred. Rinse thoroughly with

lukewarm water. In any case, do not use a high pressure cleaner. If you want the wood to keep its

original colour wood and protects its natural appearance for a long time. Apply the saturator

twice a year on over time, use a "colourless saturator" that nourishes the wood that has been

cleaned beforehand with a dry cloth and apply it in the direction of the wood ﬁbres. If after

cleaning, stains remain, you can then sand the surface with ﬁne grain sandpaper. This is the

advantage of solid wood. If you have neglected the maintenance of your wooden furniture until

now, it is not too late to make up for the damage. Whatever your case, test your solution on an

inconspicuous area to make sure the result is what you want.

Wintering

In case of prolonged non-use or bad weather , it is recommended to store your product in a dry

place or to use a suitable cover to protect your it.

5. FASTENINGS

For better stability and for your safety, tighten the screws once again around two

weeks after setup. Tighten the screws also at least once a year for a long-lasting

maintenance.

6. REPAIR

Let's not throw away! Let's repair! Repairing a product is a quick and easy way to signiﬁcantly

increase its lifespan and avoid throwing it away. At Naterial, we actively work to facilitate the

repair of our products and o er the right spare parts for each product we sell. The service

department at your point of sale has a list of spare parts available for that product. In case of a

defective or broken part, we invite you to contact the after-sales service of your point of sale.

7 .

In order to protect the environment, cardboard packaging and products at the end of their life

cycle must be dropped o at a waste collection organization for sorting, processing and a new

life.