Car and Driver CAD-AIRX300 Manual Del Usuario página 6

Step 4. Start inflating
Place the inflator on flat surface. Press the Power button
The display screen will show the real-time pressure. When the tire reaches the
preset pressure, the inflator will automatically stop inflating.
• During inflation, you can also manually stop inflation by pressing the
Power button
Step 5. Disconnect the inflator
Disconnect the air hose and adapter
from your tire or ball, then tighten the
dust cap back in place.
Turn your inflator off, and allow it to
cool for a few minutes (During the
cooling process, do not unscrew the
air hose from the inflator, so you don't
touch the heated air hose connector.).
· During inflation, we suggest you touch the inflatables to check its status from
time to time.
· If the tire or ball is overinflated by accident, you'll need to deflate. To deflate,
you just connect the air hose to the inflatables, and wait until it deflates.
Using the flashlight
· When you inflate at night, you can press the Flashlight button
the flashlight on. Press it again to turn it off.
NOTES:
· When inflation is completed, please quickly remove the air hose and the
valve adapter from your inflatables to avoid air leaking.
· The pressure required by balloons, pool floats, or other children's toys may
be lower than the pressure minimum of the inflator, and the inflator won't
automatically stop even when the inflatable is fully inflated. You can try to
manually inflate these items by press the Power button
· The inflator will keep the last set pressure unit and the pressure the next time
it is turned on.
· If overheat or air leakage occur during inflation, the Overheat and Air leakage
icon will light up on the display screen.
· If the sealing ring on the air hose gets degraded or damaged in any way,
please replace it with a new one.
, and press again to continue.
M
M
EN 5
to start inflating.
M
.
M
Tire
Air Hose
to turn