TCL RF318BSF0 Instrucciones De Funcionamiento página 10

The above is the computer control board of the product
Power on for the first time
The first time the power is turned on, the refrigerator runs under 5
Gear adjustment
Repeatedly pressing the "‹ "key or" ›" key, the refrigerator position will cycle between "02"
→ "04" → "05" → "06" → "08" → "02", select the appropriate position to stop the operation and
Wait for 5 seconds and the gear is confirmed.
Power-off memory
When the power is cut off, the instantaneous state of the power cut is locked.After the incoming
call, it still works according to the settings before the power cut.
Damper adjustment paddle
damper adjustment dial adjustment principle behind the refrigerating drawer: Usually we
recommend using it in the mid-range.
When the temperature in the box varies with the opening and closing of the refrigerator, the
ambient temperature, and the place where it is placed, etc.
Refrigerator temperature adjustment
When the damper adjustment blade is adjusted to the "cold" side, the amount of cold air
blowing to the refrigerating compartment can be increased to achieve a better refrigerating
compartment cooling effect.
Freezer temperature adjustment
When the damper blade adjustment is adjusted to the "coldest" side, the amount of air blowing
to the refrigerating compartment is reduced, which will extend the compressor operating time
and enhance the refrigeration effect of the freezing compartment.
℃
.
8
EN