ORANGE 35-02-002 Manual De Instrucciones

INSTRUCTION MANUAL
35-02-002
SAFETY INSTRUCTIONS
Before using this product, read carefully the following instructions.
Place the product on a stable and flat surface.
Do not use the heater outdoors.
Do not use the product if the cord or plug is in bad condition. If the heater is
malfunctioning, has suffered a fall or shows any failure, return it to the service center.
Unplug the heater while is not in use.
Before switching on the appliance check if the electrical voltage and frequency of the
circuit correspond to those indicated on the appliance.
Voltage: 220V-240V / 50Hz
Power Consumption: 1000W / 2000W
PART LIST
1. Adjustable Thermostat
2. Temperature adjustment
3. Power Indicator Light
4. Handle
5. Air Outlet (Front Cover)
6. Air Inlet (Back Cover)
OPERATING INSTRUCTIONS
Note: put the appliance on a stable and flat surface for no risk of falling down. Be sure
that there is enough space for the fan heater while operating, at least 19.7" around the
appliance, and right before the air outlet, the distance should be at least 47.2"
4.
5.
1.
Plug in the appliance.
The electric Heater its equipped with 4 position switch: off, fan, low and high heat and
an adjustable thermostat:
HIGH
LOW
Note: for a fast heating result, adjust
the temperature to the maximum (II).
When you feel that the temperature of the room is comfortable, turn the thermostat
switch slowly to the left to the minimum position until the appliance stops working.
Note: the thermostat switch will maintain the room temperature at the desired
temperature automatically.
Reboot Instructions:
This product contains an automatic safety shutdown switch for overheating
protection, which is activated when the internal temperature exceeds normal
operating temperatures.
In case the heater shutdowns:
Turn the temperature switch to the "O" position.
6.
Unplug the appliance and let it cool down for at least 10 minutes.
Plug in the heater and turn it on.
WARNING:
If the appliance does not work properly, remove the plug immediately from the socket
3.
and take the it to a service center.
2.
CARE & CLEANING INSTRUCTIONS
Turn the heat switch to the "
operating for 3 to 5 minutes to lower the internal temperature of the appliance, turn
the heat selection switch to the "O" position.
Clean the air inlet and outlet regularly (at least twice a year).
Before cleaning the Electric Heater, first turn it off, then remove the plug from the
socket and wait until it cools down.
Use a damp cloth to clean the heater surface. Dry it before using or storing the
product.
OFF
POWER
INDICATOR
LIGHT
" position before turning off the appliance. After
FAN
ONLY
LOW
HEAT
HIGH
HEAT