Publicidad
Idiomas disponibles
Idiomas disponibles
7.
The string trimmer should be switched off immedi-
ately if it shows any signs of abnormal operation.
8.
Don't force the tool. It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
9.
Don't overreach. Keep proper footing and
balance at all times.
10. Stay Alert - Watch what you are doing. Use
common sense. Do not operate appliance
when you are tired.
Store idle appliances indoors.
11.
12. Keep fingers away from switch trigger when
not operating the tool and when moving from
one operating position to another.
Intended use of the tool
1.
Use right tool. The cordless string trimmer is
only intended for cutting grass and light weeds.
It should not be used for any other purpose
such as hedge cutting as this may cause injury.
Use only the manufacturer's recommended
2.
accessories and attachments. Use of any other
accessories and attachments may increase the
risk of injury.
Personal protective equipment
1.
Dress Properly. The clothing worn should be
functional and appropriate, i.e. it should be
tight-fitting but not cause hindrance. Do not
wear loose clothing or jewelry. They can be
caught in moving parts. Use of thick leather
gloves and substantial footwear is recom-
mended when working outdoors. Wear protec-
tive hair covering to contain long hair.
In order to avoid either head, eye, hand or foot
2.
injuries as well as to protect your hearing the
following protective equipment and protective
clothing must be used during operation of the
equipment.
Fig.1
3.
Always wear a helmet where there is a risk of
falling objects. The protective helmet is to be
checked at regular intervals for damage and
is to be replaced at least every five years. Use
only approved protective helmets.
4.
Use safety glasses. The visor of the helmet (or
alternatively goggles) protects the face from
flying debris and stones. During operation
of the tool always wear goggles, or a visor to
prevent eye injuries.
Wear adequate noise protection equipment
5.
to avoid hearing impairment (ear muffs , ear
plugs etc.).
Fig.2
6.
Work overalls protect against injury from
flying stones and debris. It is strongly recom-
mended that the user wears work overalls.
7.
Special gloves made of thick leather are part of
the prescribed equipment and must always be
worn during operation of the tool.
8.
When using the tool, always wear sturdy shoes
with a nonslip sole. This protects against injuries
from flying debris and ensures a good footing.
9.
Use a dust mask if operation is dusty.
Electrical and battery safety
1.
Avoid dangerous environment. Don't use the tool
in damp or wet locations or expose it to rain. Water
entering the tool will increase the risk of electric shock.
2.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to battery
pack, picking up or carrying the machine. Carrying
the machine with your finger on the switch or energizing
machine that have the switch on invites accidents.
3.
Disconnect the battery pack from the machine
before making any adjustments, changing
accessories, or storing machine. Such preven-
tive safety measures reduce the risk of starting the
machine accidentally.
4.
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
Use machines only with specifically desig-
5.
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
When battery pack is not in use, keep it away
6.
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
7.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid con-
tacts eyes, seek medical help. Liquid ejected from
the battery may cause irritation or burns.
8.
Do not use a battery pack or machine that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
9.
Do not expose a battery pack or machine to
fire or excessive temperature. Exposure to fire
or temperature above 130°C (265°F) may cause
explosion.
3 ENGLISH
Publicidad
