Publicidad
STEP 2B Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate
directly onto concrete surface (no wall covering)
08
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
For concrete applications, arm assembly
Keep this in mind when selecting wall plate location
●
Install three (3) lag bolts
1
07
3x
1x
CAUTION:
Avoid potential personal injury or property damage!
Install three (3) lag bolts
at the top and one (1) lag bolt
09
3
C1
CAUTION:
Be sure the anchors C1 are seated flush with the
concrete surface.
Concrete achors (Fischer UX10 x 60R) C1 available through Customer Service.
(STEP 3) must remain centered in wall plate
10
in the top and one (1) lag bolt
09
09
09
Solid Concrete or Concrete Block Installation
.
08
in the bottom as shown in STEP 1
2
3 ¾ in. (9.5 cm)
3/8 in.
(10 mm)
CAUTION:
at the bottom.
4
09
08
002862.eps
CAUTION:
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
wall plate
08
DO NOT over-tighten the lag bolts
Concrete Anchors are not included
Contact Customer Service to inquire about
the concrete anchors.
Never drill into the mortar between blocks.
Avoid potential personal injury or property damage!
only until they are pulled FIRMLY against the
09
.
.
09
07
09
.
7
Publicidad
