Descargar Imprimir esta página

Brizo 68414 Serie Instrucciones De Montaje

Publicidad

Enlaces rápidos

®
ASME A112.18.1 / CSA B125.1
ASME A112.18.2 / CSA B125.2
ICC/ANSI A117.1
Models/Modelos/Modèles
68414
Series/Series/Seria
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
For easy installation of your Brizo
faucet you will need:
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
• To purchase the correct water supply hook-up.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
• Comprar las conexiones correctas para el
suministro de agua.
Pour installer votre robinet Brizo
facilement, vous devez:
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
• Acheter le bon nécessaire de raccordement.
THREE HANDLE ROSETTE BIDET VALVE WITH
VACUUM BREAKER AND POP-UP ASSEMBLY
VÁLVULA DE TRES MANIJAS PARA EL BIDÉ DE
BOQUILLA ROCIADORA CON ROMPEDOR DE
VACÍO Y ENSAMBLE DEL DESAGÜE AUTOMÁTICO
U P
C
®
ROBINET À TROIS POIGNÉES POUR BIDET AVEC
AJUTAGE, CASSE-VIDE ET RENVOI MÉCANIQUE
®
®
T E FLO N
L
N
O
T
L
E
F
1
3/32" (2.38mm)
2 mm
3/32 po (2.38mm)
2 mm
9/26/09
3/32"
(2.38mm)
Rev. A

Publicidad

loading

Resumen de contenidos para Brizo 68414 Serie

  • Página 1 You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: T E FLO N 3/32" (2.38mm) 2 mm 3/32 po (2.38mm) For easy installation of your Brizo ® faucet you will need: • To READ ALL the instructions completely before beginning.
  • Página 2 This warranty excludes all industrial, commercial & business usage, whose purchasers are parts may be obtained by calling 1-877-345-BRIZO (2749) (in the U.S. and Canada) or by hereby extended a five year limited warranty from the date of purchase, with all other terms of writing to: this warranty applying except the duration of the warranty.
  • Página 3 RP62796▲ Diverter Handle & Set Screw Manija Desviadora y Tornillo de Ajuste Manette d’inverseur et vis de calage RP62795▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP62797▲ Diverter Body Cuerpo Desviador Corps d’inverseur RP24▲ Rod Guide Assembly (Complete) Ensamble de la Barra de Guía Guide-Tirette (Complet) RP54533 RP48449...
  • Página 4 3/32" (2.38mm) RP62798▲ Hot or Cold Handle Assembly (1) Ensamble de la Manija de Agua Caliente o Fría (1) Manettes d’eau chaude ou d’eau froide (1) RP62799▲ Base w/Gasket Base con Empaque Embase avec Joint RP6060, RP6060SB Bonnets Bonetes Chapeaux RP24097 1/4 Turn Stop Tope a un 1/4 de Giración...
  • Página 5 INSTALLATION OF DIVERTER VALVE/VACUUM BREAKER Note: Please refer to bidet bowl installation instructions to identify hole location for diverter valve. Hole size must be 1-1/8” diameter minimum. INSTALLATION OF ROSETTE SPRAY Apply silicone bead (1) under rosette (2). Insert Assemble diverter valve (1) with “Y” and gasket (2) as shown in illustration. Slide one rubber cone rosette into appropriate hole in bidet bowl.
  • Página 6 1/2" (12.7 mm) INSTALLATION OF VALVE ASSEMBLIES Remove bonnet (1), base and gasket (2) from cold end valve assembly (3). MAKE CONNECTIONS TO WATER LINES: Place valve assembly (1) with nut (2) and washer (3) through proper mounting hole Choose hook-ups for 1/2" I.P.S. connections: from bottom.
  • Página 7 Step 3b METAL POP-UP Step 3c Remove stopper (1) and flange (2). Remove pivot nut (1). Install horizontal rod Apply silicone to underside of flange (1). Insert body (2) into sink. Screw flange (1) into body (2). (2) and stopper (3) as removable (4) or non- removable (5).
  • Página 8 2.5 mm (3/32") FLUSH YOUR SYSTEM Turn diverter handle (1) clockwise to ‘rim feed’ position. Turn on water supplies (2) and turn hot and INSTALL HANDLES: cold handles (3) to open position for one minute to flush any debris from system. Be sure glide ring (1) is properly seated in bottom of Check all connections at arrows for leaks.