MaxPro MPBMS255L Manual Del Usuario página 6

remove the wedged workpiece
6.In case of jamming or electrical or mechanical malfunction, immediately switch off the tool and
disconnect the plug
7.If the cord is damaged or cut through while working, do not touch the cord, but immediately disconnect
the plug
8.Never use the tool when cord is damaged; have it replaced by a qualified person
LASER RADIATION
1.Do not look into the laser beam (laser radiation)
2.Do not point the laser beam at persons or animals
3.Do not use any magnifying optical tools (such as magnifying glasses, telescopes, or binoculars)
to view the laser beam
4.Do not operate the tool in the presence of flammable liquids, gases or dust
5.Do not operate the tool with children around
6.Do not replace the installed laser with another laser type
AFTER USE
1.After switching off the tool, never stop the rotation of the accessory by a lateral force applied against it
2.Only remove cut-offs or other parts of the workpiece from the cutting area when all moving parts have
come to a complete standstill
3.The saw blade becomes very hot during use; do not touch it before it has cooled down WHEN
CONNECTING NEW 3-PIN PLUG (U.K. ONLY):
4.Do not connect the blue (= neutral) or brown (= live) wire in the cord of this tool to the earth terminal of
the plug
5.If for any reason the old plug is cut off the cord of this tool, it must be disposed of safely and not left
unattended
M M itre Saw MPBMS255L User Manual
SYMBOLS
Read the manual
Warning
Double insulation
Wear eye protection
Wear ear protection
Wear dust mask
Do not dispose of old appliances in the household garbage
Keep your hands and feet away from all opening
6