Hilti NURON RT 6-22 Manual De Instrucciones página 8

Battery tool use and care
▶ Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
▶ Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
▶ When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
▶ Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
▶ Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
▶ Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature
above 130° C (265 °F) may cause explosion.
▶ Follow all charging instructions and do not charge the battery pack or tool outside the temperature
range specified in the instructions. Charging improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Service
▶ Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
▶ Never service damaged battery packs. Service of battery packs should only be performed by the
manufacturer or authorized service providers.
2.2 Additional safety instructions
Personal safety
▶ Never tamper with or modify the product or accessories in any way.
▶ Use the product and accessories only when they are in perfect working order.
▶ Do not use the product for purposes for which it was not intended. Use it only as directed and when in
faultless condition.
▶ The product is designed exclusively for setting blind rivets.
▶ Never use the product without the mandrel container installed.
▶ Before beginning work, check that the mandrel container is installed securely.
▶ To reduce the risk of injury use only genuine Hilti accessories and spare parts or those of equivalent
quality.
▶ Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶ Do not use a nosepiece holder to lift the product.
▶ Do not use a nosepiece holder to hang up the product.
▶ Keep the air vents clear at all times. Risk of burn injuries due to blocked air vents!
▶ Use only fasteners of a type approved for use with the product.
▶ Never point the product toward yourself or other persons.
▶ Never press the nosepiece of the product against your hand or against any other part of your body (or
other person's hand or part of their body).
▶ Drive the fasteners into metal only. Do not attempt to drive fasteners into other materials.
▶ Pull the trigger only when the nosepiece of the product is in contact with the working surface and the
tool is fully compressed.
▶ When driving fasteners, always hold the product at right angles to the working surface in order to prevent
the fastener from being deflected by the material.
▶ Never re-attempt to drive a fastener, because this can cause breakage.
▶ Switch the product on only after you have brought it to the working position.
▶ Never leave the product unattended.
▶ Always remove the rivet before cleaning, servicing or carrying out maintenance work on the tool.
▶ Unload (remove blind rivet) the products when they are not being used and store the blind rivets it in a
locked, dry place inaccessible to children.
▶ Do not disassemble the product while it is hot. If this is unavoidable, wear protective gloves.
▶ Do not use the product if parts are damaged or if operating controls do not function faultlessly. Have the
product repaired by Hilti Service.
4 English 2293237
*2293237*