THERMODYNE UTILLIAN U8 Manual De Instrucciones página 26

• Do not allow water or water-based
cleaning agents into the Base at any
time.
• If silicone parts, such as the Vapor
Path are soaked in alcohol, they can
swell and lose their shape.
26 Operation of the Device
Using a soaked cotton swab with
isopropyl alcohol the Base, including
the golden contact point, can be
carefully cleaned. You should not forget
to clean the Vapor Path as well as the
hole in the Base.
•Do not touch the heating elements,
such as the BurstHit 3D Heating
Chamber™, during operation and
cooling.
•Do not oprate if flammable cleaning
agents or disinfectants, such as
isopropyl alcohol, have not fully
evaporated.
Once clean, dry and after evaporation of
volatile cleaning agents, the device can
be reassembled from its components
and is ready to be used again.