Publicidad
Idiomas disponibles
Idiomas disponibles
The product is not a toy. Children should be watched to ensure that
j)
they do not play with the appliance.
2.3. Safe use of the device
Disconnect the pressure hose before making adjustments, changing
a)
accessories, and after working with the equipment. This precaution
reduces the risk of accidents.
Keep unused product out of the reach of children and anyone
b)
unfamiliar with the device or this manual. Products are dangerous
when used by inexperienced users.
Keep the product in good working order. Check before each use for
c)
general damage or damage to moving parts (cracks in parts and
components or any other condition that may affect the safe operation
of the device). If damaged, have the device repaired before use.
Keep the product out of the reach of children.
d)
Repairs and maintenance should be carried out by qualified personnel
e)
using only original spare parts. This will ensure the safety of use.
To ensure the designed operational integrity of the device, do not
f)
remove factory-installed covers or loosen screws.
When transporting or moving the device from storage to the place of
g)
use, observe the health and safety rules for manual handling applicable
in the country where the device is used.
Avoid situations in which the device stops under heavy loads during
h)
operation. This can cause overheating of the drive elements and
consequent damage to the equipment.
Do not leave the device switched on unattended.
i)
Clean the device regularly to prevent permanent dirt build-up.
j)
The provided value of vibration emission is measured according to the
k)
standard measurement methods. The value of vibration emission may
change if the unit is used under different environmental conditions.
Use air to power the unit, no other gases are allowed.
l)
Use reinforced hoses for the compressed air connection in areas with a
m)
high risk of mechanical damage.
Before each use, make sure that the nozzle is properly mounted in the
n)
machine and that the hose is properly attached and undamaged.
The air supplied to the machine should be dehumidified, clean, and free
o)
of contaminants. Contaminants can clog hoses and cause damage to
the machine and its components.
Publicidad
