N-Gear Disco Star 710 Zilver Manual De Usario página 7

Using TWS
If you have another DISCO Star 710 speakers , you can pair and play the two speakers together for a surround sound
effect , or have two speakers playing in different rooms .
- To enter Party Plus Mode, Power ON both speakers and make sure both units are in Bluetooth mode .
- Press and hold the Mode button on the remote control , and the speakers will attempt to pair to each other .
- When the two speakers are paired together a voice will announce the connection .
- Connect Bluetooth device to speakers
- Use your device to select and play tracks, The audio will now be heard through both speakers .
- To disconnect the speakers, press the Mode button on the remote control .
Using AUX audio port
- Plug in the 3.5mm audio cable into the AUX input at the back panel of the speaker. A voice prompt " AUX IN Mode "
will confirm .
- You can connect to any audio device that has a 3.5mm audio output jack and can playback any audio from this
device.
- Choose your favorite song from your connected media device .
NOTE : While using the AUX in function, some functions such as play/pause , previous/next track can only be
controlled through your connected media device .
LET'S USE THE MICROPHONE
- Turn on your speaker and insert the 1/4" plug of the Microphone into the Microphone Input port at the rear of the
speaker.
- Switch on the microphone by moving the switch button to the 'ON' position .
- Turn the Volume of the Microphone to the desired level using the Microphone Volume dial at the front of the
speaker.
- Speaker or sing into the microphone and you will hear your voice through the speaker .
- Adjust the microphone volume on front of the speaker to your desired sound level.
Using a Micro-SD card or USB stick
- Insert your USB stick or Micro SD Card at the back panel of the speaker. A voice prompt "USB mode " or "Micro SD
card mode " will be confirmed .
- Your speaker will automatically playback music from your selected device USB or Micro SD.
CHARGING BATTERY
- By connecting the Type C Charging cable (included) to the back of the unit and USB to USB Adaptor (not included)
to an AC Power outlet.
- Charging time is about 5 hours in Power Off mode.
- In Charging mode, the back panel will show a red light indicator and when charging is completed, the light will turn
off.
EN