JBM 54290 Manual De Instrucciones página 17

REF.54290
Description
Elemento Descripción
NEW Gauges for flow pressure of new and used
fluid.
Inspection windows to check new and used
USED
fluid colour.
↑ Press it to select function option in main
menu.
↓ Press it to select function option in main
menu.
ENTER Confirmation.
RETURN 1. Menu to return.
2. Press one time to stop current operation.
Press once more to return to previous
interface.
DEL Press to delete the previous character.
In database interface, press it you can delete
some menu item.
LIGHT 1. In main menu, you can switch on/off the
lights of the liquid inspection glass.
2. When pressing the quantity of liquid, you
can press this key to write ".".
3. When pressing information in the databa-
se interface, you can use this key to switch
between uppercase and lowercase letters.
OPERATION
Note:
While the unit is in operation, it will produce vibrations and
noise, which is normal. Do not take it as the malfunction.
Main menu
Item
Add detergent
Exchange
Adjust fluid level
Empty new tank
Empty used tank
System setting
Description
Add detergent to the transmission
system
Exchange transmission liquid
Adjust the quantity of fluid inside
the transmission system
Drain left fluid inside new fluid tank
Drain used fluid inside used fluid
tank
Modify system parameters
Preparation
Lift the vehicle to keep the drive wheels off the ground at
least 20cm.
Apply the parking brake.
Hose connection
Check vehicle's manufacturer instructions manual to locate
the hose where flows the transmission oil from the gearbox
to the cooler.
Disconnect the hose.
Locate the matched connector inside the connector box.
Connect the adapters.
Connect the two hoses marked as "TO TRANSMISSION" from
the machine to the disconnected two ends of the hoses of
the transmission system.
The machine automatically detects the direction of the fluid
so you can connect the hose in any place.
The machine should be connected like shown in the image
below.
Power cables connection
Connect the power cables of the main unit to the designed
power supply.
Check-up
Start the engine and ensure that there is no leakage.
Confirm that the power supply of the auto transmission
cleaner and fluid exchanger is normal, and then switch on
the unit.
Filling liquid
Filling detergent
When you need to clean the system, fill proper amount
of detergent into the detergent container.
Adding new oil
When you need to exchange the oil, please fill new fluid
into the new fluid tank.
· 17 ·