Publicidad
Idiomas disponibles
Idiomas disponibles
Table 4
RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE
THE SCOOTERS ARE INTENDED TO OPERATE IN AN ELECTROMAGNETIC ENVIRONMENT IN WHICH RF
DISTURBANCES ARE UNDER CONTROL. THE CLIENT OR USER OF THE SCOOTERS CAN CONTRIBUTE
TO PREVENTING EM INTERFERENCE BY ENSURING A MINIMUM DISTANCE BETWEEN THE MOBILE AND
PORTABLE RF COMMUNICATIONS DEVICES (TRANSMITTERS) AND THE SCOOTER BATTERY CHARGER
DURING CHARGING AND THE INTERNAL SCOOTER DEVICES DURING THEIR OPERATION AS INDICATED
BELOW, IN RELATION TO THE MAXIMUM OUTPUT POWER OF THE RADIO COMMUNICATION EQUIPMENT.
TESTS
SEPARATION DISTANCE AS A FUNCTION OF THE FREQUENCY OF THE TRANSMITTER (M)
During battery
Maximum
charging
rated output
power of
from 150 kHz
transmitter
to 80 MHz
(W)
d=[3,5/V1]√P
0.01
0.35
0.1
1.1
1
3.5
10
11
100
35
For transmitters whose maximum rated output power is not listed above, the recommended separation distance
d, in metres (m), can be calculated using the equation applicable to the transmitter frequency, where P is the
maximum rated output power of the transmitter, in Watt (W), as given by the transmitter's manufacturer.
NOTE 1: At 80 MHz and 800 MHz, apply the separation distance for the higher frequency band.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation
is affected by absorption and reflection from structures, objects and people.
RADIO COMMUNICATIONS EQUIPMENT AND THE SCOOTERS
During use of
During
the CN22
battery
Scooters
charging
from 150 kHz
from 80 MHz
to 80 MHz
to 800 MHz
d=[3,5/V1]√P
d=[3,5/E1]√P
0.35
0.35
1.1
3.5
11
35
During use of
the CN220
Scooters
from 80 MHz
to 800 MHz
d=[3,5/E1]√P
0.35
1.1
1.1
3.5
3.5
11
11
35
35
During use of
During battery
the CN22
charging
Scooters
from 800 MHz
from 800 MHz
to 2.5 GHz
to 2.5 GHz
d=[7/E1]√P
d=[7/E1]√P
0.7
0.7
2.2
2.2
7
7
7.3
7.3
70
70
9
Publicidad
