Publicidad
Idiomas disponibles
Idiomas disponibles
901
Opening your life
3.2 Installing the operator and rail
Figure 2
When you have installed the open – close position, in order to prevent the travelling shift situation caused by small rebound
adjustment and many times of resistance, you can attach the stopping mechanism when door reached it fully opened
position, please refer to below installation steps:
1. Open the door to the opening position, put the stopping mechanism into the track and touch the clutch, refer below
picture.
2. Tighten the two screws M6*14 screws (no not tighten them completely).
3. Tighten the screw M6*10.
4. Tighten the screw M6*14 so that the stopping mechanism can the track.
Figure 3
2
Publicidad
