Kumio ICE-1032 Manual De Instrucciones página 10

5.Place the lid on the ice cream container and turn it clockwise as far
as it will go to make sure it is firmly attached..
Note: the triangle mark on the components rotates to the "LOCK"
mark.
6.Press the [POWER] button to make the machine electrified. Press
the [MENU] button to choose the working mode:①cooling only ②
mixing only ③ice cream.
7.Press the [START/PAUSE] button to start the operation.
NOTE: You can pause the operation anytime by pressing the
start/pause button. Continue the operation by pressing the button
again.
8.When the operation is finished, an acoustic signal will sound.
Disconnect the power plug from the socket outlet. Turn the
transparent lid and motor components anticlockwise to take out the
lid then take out the ice cream container.
Note: Condensation may form on the outside of the ice cream
container and freeze while the device is operating. This may make it
more difficult to remove the ice cream container from the device. In
this case, wait a little while before removing the ice cream container.
9.Take the ice cream out of the container with the provided ice cream
scoop or with a wooden or plastic spoon. Do not use metal utensils in
the container to avoid damaging it.
8