Black and Decker BHVHC15 Manual De Instrucciones página 8

ENGLISH
SET UP & USE
OPERATING INSTRUCTIONS
Place the heater on a firm, level surface and plug the unit directly into a 120V AC
electrical outlet.
When the heater is plugged in it will be in standby mode.
Press the POWER
The heater will supply HIGH heat and show temperature of 95°F on the digital display.
Press the Mode
Only, E-Save Settings.
High Heat (1500 Watts).
FAN ONLY
E-Save Function
When the E-Save function is activated and
heater will automatically select power levels based on the selected temperature and
room temperature. The heater will cycle between these settings to achieve maximum
comfort while using lower wattage settings to save energy.
Setting to Temperature Levels (40°F - 95°F)
Press to increase the set temperature by 5°F and press
temperature by 5°F increments each time you press until your desired temperature is
set. The selected temperature will show on the digital display.
Oscillating Air Flow
Pressing this button will active the oscillating air flow. Press again to shut off this
function.
Osc
Page 8
button on the heater or the remote control to start the heater.
button repeatedly to scroll through High Heat, Low Heat, Fan
Low Heat (900 Watts).
E-SAVE function
eco
eco
shows on the digital display, the
to decrease the set