Publicidad
Idiomas disponibles
Idiomas disponibles
Three-Stage Brightness
Adjustment Controlled by On/Off
Button (Fig . 3)
WARNING
into the light when the light is on .
The light has a three-stage brightness
adjustment, providing different light intensities
for your operation.
• Press the On/Off button to turn on the light in
the high brightness stage.
• Press the On/Off button again to change to
the medium brightness stage.
• Press the On/Off button the third time to
change to the low brightness stage.
• Press the fourth time to turn the light off.
• In any brightness stage, press and hold the On/Off button for 3 seconds to directly shut
down the light.
NOTE: The light will flash slowly and then turn off when the battery pack charge is too low.
To Adjust the Auxiliary Support
WARNING
The light is equipped with an auxiliary support to improve the stability of the light.
The auxiliary support can be swiveled 360° and locked at 0° or 90° with a sound "click". When
using the light, please rotate the auxiliary support 90° to the left or right.
There are two hanging holes on each side of the auxiliary support. When using the light on
an uneven surface or hanging on the wall, the auxiliary support can be secured by screws or
nails.
NOTICE: It is not recommended that users disassemble the auxiliary support. If the support is
unstable, tighten the nut at the bottom of the auxiliary support.
Fig. 4a
0° Position
To reduce the risk of
injury, do not look directly
To reduce the risk of injury and damage, do not use the light on
uneven or inclined surfaces .
Fig. 3
Fig. 4b
Hanging Holes
90° Position
On/Off Button
11
Publicidad
