Honeywell HE220 Instrucciones De Instalación

HE220, HE260 Humidifier
Installation Kit
APPLICATION
This installation kit contains all the parts necessary to install
your new Honeywell HE220 or HE260 Humidifier.
INSTALLATION
Please see www.yourhome.honeywell.com for complete
installation instructions and owner's manual.
Preparing for the Installation
Be sure to identify all the required (Table 1) accessories
(included) and make sure the appropriate tools are available
before beginning the installation.
Automation and Control Solutions
Honeywell International Inc.
1985 Douglas Drive North
Golden Valley, MN 55422
customer.honeywell.com
Included Accessories
Quantity
6 ft (1.85M)
20 ft (6.2m)
20 ft (6.2m)
10 ft (3.1m)
1 bag
Required Tools
Tools required for installation include:
• Tin snip.
• Screwdriver.
• Adjustable or open-end wrench.
• Drill, punch or awl.
• Level.
® U.S. Registered Trademark
© 2011 Honeywell International Inc.
69-2633ES—03 M.S. Rev. 07-11
Printed in U.S.A.
INSTALLATION INSTRUCTIONS
Table 1. Included Accessories.
Accessory
Bypass ducting including:
6 in. (155 mm) diameter flexible duct
Starter collar
Summer shut-off damper
Duct tape
18 gauge, two-strand thermostat wire
1/4 in. (6.35 mm) OD feed water tubing
1/2 in (12.7 mm) ID drain tubing
Connecting and mounting hardware:
Wire nuts (4)
No. 8 sheet metal screws (18)
Drain tube clamps (2 sizes)
Feed tube mounting clamps (6)
Brass inserts (2)
Plastic compression rings (2)
69-2633ES-03