Vonyx SPLASH300 Manual De Instrucciones página 3

UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
CONTROLS AND CONNECTIONS
1. AUX Input
3.5mm Stereo jack can be used to connect a CD player, MP3 player, smartphones or other audio sources.
2. Microphone Input
6.35mm (1/4") jack input for inserting a microphone.
3. DC Power Input
Insert the supplied power adapter to power/charge the unit.
4. Line Input
RCA line input.
5. USB Slot
To play media files from a USB device. Can also be used to charge other devices
(such as smartphones, etc.).
6. Reset
Press to hard reset the device.
7. Power
Press to turn the device on, press and hold to turn off.
8. BT Mode
Press to switch to BT streaming mode directly.
9. Mode
Press to change modes.
10. Link
Press to initiate the stereo pair (link) function.
11. Microphone Volume
Press to increase/decrease microphone output volume.
12. Previous
Press to change to previous track.
13. Play / Pause
Press to start/resume or pause playback.
14. Next
Press to change to next track.
15. Repeat
Press to toggle repeat modes in USB mode.
16. Beast
Press to turn beast mode (bass boost) on/off.
17. Lights
Press turn the party lighting on/off or to change lighting mode (continuous or beat triggered).
18. EQ
Press to toggle different equalizer presets (classical, jazz, pop, rock, normal and vocal).
19. Color
Press to change the lighting effect color.
20. Master Volume
Press to increase/decrease master output volume.
CONNECTING WITH BT
1.
2.
3.
Attention: The BT distance is approx. 10 meter without any barrier.
STEREO PAIRING / LINK
The Splash300 features a stereo pairing function. This means you can purchase 2 Splash300 speakers and connect them to
play in stereo wirelessly. Step 1: set up a BT streaming connection with speaker 1. Step 2: put speaker 2 into BT mode. Step 3:
push the LINK button on speaker 1 and 2. When pairing is successful, you'll hear a chime as confirmation.
Activate the BT-function on your device (Mobile phone, tablet etc.) from which you want to play the
music. See the operating instructions for that device.
Press the "BT" button to enter the BT-function.
Select "Splash300" on your BT-device and make the BT-connection.
3