Publicidad
Idiomas disponibles
Idiomas disponibles
III. Basic operation
• The mouse has 800/1200/1600dpi. Configure the DPI resolution by pressing the
DPI button.
• Press any button to activate the mouse after it goes into sleep mode.
Important: Must be used with a device with Bluetooth
with a Bluetooth
adapter (not included).
®
mode and 2.4GHz mode cannot be used simultaneously.
Note: Bluetooth
®
IV. Using the mouse with 2.4GHz connection
1. Turn on the mouse switch.
2. Open the magnetic base and take out the USB nano receiver.
3. Plug the USB nano receiver into the USB port of your computer or laptop.
4. Choose the 2.4GHz option by pressing the Bluetooth
2.4GHz red LED light is on for about 3 seconds.
5. The mouse is ready to use in the 2.4GHz band.
V. Pairing the mouse with your computer/laptop
1. Turn on the mouse switch.
2. Press and hold the Bluetooth
button for 2 seconds, move the switch in the
®
mouse between BT3.0 and BT5.0. When the Bluetooth
blinking the mouse is ready for pairing.
3. Next, set your device to "discover' the wireless mouse.
4. Place the mouse and your device not more than three feet from each other.
compatible connection or
®
button, make sure the
®
LED light starts
®
5. On your computer/laptop, select the newly discovered device (KMB-501)
being displayed in the Bluetooth
®
6. When the device asks if you want to pair the mouse with it, click Yes or OK
to accept.
7. You only need to pair the mouse with your device once, as it will reconnect
with memorized devices automatically.
Precautions
• Clean the mouse with a dry, soft cloth.
• Avoid using the mouse on extremely uneven or reflective surfaces.
• Do NOT disassemble the mouse.
list.
Publicidad
