Glacier bay BTFZ1301CP Guía De Uso Y Cuidado página 4

Installation
1
Determining the mounting
location
Determine the location where you wish to install
your accessory.
Place the mounting bracket (BB) at the desired
location and mark the installation holes using a
pencil.
BB
3
Installing the bracket in a
wood stud
Drill a 3/32 in. pilot hole at each pencil mark made.
Align the mounting brackets (BB) with pilot holes
and secure with the mounting screws (CC).
2
Installing the bracket in
drywall
NOTE: To install the bracket in a wood stud, proceed to
Step 3. To install the bracket in ceramic tile, proceed to
Step 4.
Drill a 1/8 in. pilot hole at each pencil mark made.
Drive the E-Z Ancor® (AA) into the wall using a
Phillips screwdriver until flush with the wall.
Align the mounting brackets (BB) with the E-Z
Ancor® (AA) and secure with the mounting
screws (CC).
4
AA
AA
BB
CC
BB
CC