Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must
be returned, it is important that the product is returned in the original factory box and packaging. If the device has been
exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising
condensation water might damage your device. Leave the device switched off until it has reached room temperature.
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the
mains voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The
unit must also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
1. Power / Source
Press to switch modes
Press and hold to turn the device on or enter standby mode
2. Alarm
Press to set an alarm
3. Preset
Press to open the preset list
Press and hold to save a station as preset
4. Snooze / Station / Select
Press, when an alarm is ringing, to snooze
Press to confirm listening to a chosen station
Press to select/input
5. Sleep
Press to set sleep timer
6. Menu / Info
Press to cycle through station information
Press and hold to open the menu
7. Volume - / <
Press to lower volume during playback
Press in menu's to scroll
8. Volume + / >
Press to increase volume during playback
Press in menu's to scroll
9. Wireless charging pad
Depending on your smartphone's design, the charging area may be positioned differently, requiring some positional
adjustment when placed on the charging surface to be functional
10. USB charge
5V USB charging port
11. DC power adapter input
9V 3.0A DC power input connector
12. Headphone jack
3.5mm jack for inserting headphones
13. Battery compartment
The radio is equipped with a battery powered back-up system, which requires 2 x AAA batteries (not included).
Open the battery compartment. Insert the batteries, making sure the positive and negative (+ or -) poles of the batteries
are in contact with the corresponding terminals within the battery compartment. Close the battery compartment by
inserting the cover. If a power cut/outage occurs, the radio automatically switches to the battery power supply and keeps
the clock and timer settings. When replacing the battery: keep the power adapter connected, otherwise all clock and
alarm settings will be lost
1. Current station and time
2. Sleep timer indicator
3. Set alarm indicator
4. PM indicator
5. Snooze indicator
6. Charging smartphone indicator
7. Volume
8. Signal strength
9. DAB mode indicator
10. FM mode indicator
11. BT mode indicator
5
Publicidad
