Publicidad
Idiomas disponibles
Idiomas disponibles
2. Installation
Measure the width of the opening where you intend to install the gate. Please refer to the below
illustrations to determine the correct installation con guration.
NOTE: The gate can be used for multi-angle mounting.
Inside the wall:
32.5" - 50.75" (82.55cm to 128.90cm)
Outside the wall:
29.25" - 47.5" (74.29cm to 120.65cm)
32.5" - 50.75"
(82.55cm to 128.90cm)
Inside the wall
3. Wall Mounting
First, take the enclosed mounting template and cut on the cutting line.
Be sure to cut any excess paper margin on the oor line.
Place template on both sides of opening.
Locate the mounting template vertical to the oor and mark the screw holes.
Mount the upper and lower wall mounts onto the wall or at surface with
screws provided.
Note: Always mount gate into solid material such as wood or metal. You may
need to use a stud nder to locate the stud in the wall.
4. Wheel Installation
Insert the wheels into the holes
on the bottom side of the gate.
Using the wrench provided, turn
the screw clockwise until tight.
29.25" - 47.5"
(74.29cm to 120.65cm)
Outside the wall
Ensure the wheel is fully secured
into the gate.
Page 3
Multi-angle
Publicidad
