SOLAMAGIC S1 Instrucciones De Montaje Y Funcionamiento página 78

Operation of the hand-held transmitter
Switching on/off:
Brief pressing of the programmed radio channel button on the hand-held
transmitter switches the radiant heater on or off.
Start-up:
Long pressing of the button on the hand-held transmitter increases the heat
output of the radiant heater from the switched off state to the desired heat
output.
Dimming:
Pressing and holding of the button on the hand-held transmitter adjusts the
heat output continuously up or down to the maximum or minimum position
(30%).
Auto-stop:
The dimmer stops automatically upon reaching the maximum or minimum
position, even if the button remains pressed.
Memory function:
Upon switching back on, a short press of the button recalls the last heat
output setting.
Synchronisation:
If multiple radiant heaters are controlled using the same hand-held transmitter
button, faults in the radio transmission path can result in different heat output
settings. For synchronisation, use the function „Start-up" to initially set all
radiant heaters in the switched-on state. Then switch off all receivers by a brief
button press. Now the „Start-up" function can be used to simultaneously set
all the actuated receivers again.
01/2015
78