Home Decorators Collection BRIMFIELD Guía De Uso Y Cuidado página 5

Installation
1
Mounting the hardware

Thread the fixture screws (AA) into the
provided holes of the mounting bracket
(EE).

Thread the hex nuts (DD) onto the fixture
screws (AA). Do not tighten the hex nuts
(DD) at this time.

Pull the supply wires out from the outlet
box and mount the mounting bracket (EE)
to the outlet box using the bracket
mounting screws (BB).

Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
screws (AA).

Adjust the fixture screws (AA) until they
protrude out from the back plate 1/4 in.

Remove the fixture body (A) and secure
the position of the fixture screws (AA) by
tightening the hex nuts (DD) against the
mounting bracket (EE).
2
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.

Connect the black supply wire to the black
fixture wire using a wire nut (CC).

Connect the white supply wire to the white
fixture wire using a wire nut (CC).

Connect the fixture ground wire to the
supply ground wire using a wire nut (CC).

Wrap all wire connections with electrical
tape for a more secure connection.
BB
AA
DD
A
HOMEDEPOT.COM/HOMEDECORATORS
5
Please contact 1-800-986-3460 for further assistance.
EE
EE
CC