Guardian QUICK-SWITCH 42105 Manual De Instrucciones página 3

English
Installation
Bungee and Retractor Transfer Keys

Attach the carabiner end of the Bungee
Transfer Key (#42122) or Retractor
Transfer Key (#42130) to a fixed location
such as a tool belt or structural anchor.
Ensure the screw-gate is tight and
remains tight throughout use.
Directions for Usage of
slot in the orange switch. See Image 2
Wrist Straps

Position the hook and loop Wrist Straps
(#42126) on your wrist. Ensure the open
end of the mount is facing your body, and
the Dock is on the inner part of your arm.
Connect Links to tools

Attach the carabiner end of the Link
(#42124) to a suitable tool attachment.
Ensure the screw gate is locked.
Docks on Belts and Anchors

Dock (#42123) slides onto a standard 51 mm
(2") belt, or install Rotating Docks (#42105)
onto pouches with open end up as shown.
Install pouch mount docks by puncturing a
hole in the tool pocket and securing in place
with the nut. Rotate the Dock as needed.
3
image 1
image 2
6 6