PURIFY M101 Manual Del Usuario página 3

MISURAZIONE UMIDITA' e TEMPERATURA
Sul display del dispositivo è possibile individuare gli indicatori della misurazione della
temperatura dell'ambiente e dell'umidità. Anche in questo caso i dati sono di tipo
puramente qualitativo e non quantitativo.
INSTRUCTIONS
- Connect the device, using the supplied USB cable, to the power supply.
The AC/DC Adapter is NOT included in the package. Use an AC/DC Adapter with
-
a USB port able to provide 5VDC-1A or 5VDC-2A .
- The device contains a rechargeable lithium battery. Battery life is about 5-8 hours
depending on wear. It is possible to keep the device always connected to the power
supply in order to ensure continuous operation.
- Before putting the product into operation, it is necessary to calibrate the device.
CALIBRATION
The calibration of the device MUST be carried out in the following cases:
STRICTLY On first start after purchase
STRICTLY Whenever the device is transported
SUGGESTED Every 6 months
To carry out the calibration carry out the following procedure:
1 Take the device to a room with a window
2 Turn on the device
3 Open the window and ventilate the room
4 Wait 10 minutes
5 Quickly press the power button 3 times
6 The device will emit a "BEEP" sound
7 The device will automatically turn off within a few seconds
8 Wait a few minutes
9 Turn the device back on
HOW TO USE THE DEVICE
The Co device can be placed anywhere in the room or hung on the wall through the two
2
holes on the back of the product.
CAUTION: Make sure the side and top louvers are not obstructed or covered.
As previously described, the product can operate using a battery for several hours or be
connected to the mains. To turn the device on and off, press the side button for about 3/5 seconds.
INTERPRETATION OF DATA and
MEASUREMENT OF AIR QUALITY
The device is able to measure the concentration of Carbon Dioxide Co in the air and to
2