ZOSI ZG2322M Guia De Inicio Rapido página 6

4. Install the Camera
1. Installation Precautions
· Avoid directing the camera towards strong light or reflective objects,
including sunlight, light glass, mirrors and other areas with strong refraction
of light sources.
· Do not install at location with objects covering or obscuring the camera.
· Avoid mounting the camera in places where too dim, and point the
camera towards a well-lit area. For better image quality, make sure the
camera and the captured subject are at the same lighting conditions.
· For better image quality, it is recommended to clean the lens with a soft
cloth from time to time.
· Do not expose the power port to water or moisture, or blocked by dirt or
other things.
· Do not install the camera where rain and snow may hit the lens directly.
· Camera may work in extremely cold conditions as low as -10℃ because
it will produce heat when powered on. You may power the camera indoors
for a few minutes before installing it outdoors. (Only for outdoor cameras).
2. Mount the camera on the wall
NOTE: Dome camera and bullet camera are installed in the same way, the
following is the example of the bullet camera. Please refer to the actual
product and install the camera according to the corresponding instructions.
Install Steps：
1
Drill holes on the wall according to the position of mounting hole
template and insert the plastic wall plugs.
3 English