Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING!
WARNING This conversion kit shall be installed by a
qualified service agency in accordance with the
manufacturer's instructions and all applicable codes and
requirements of the authority having jurisdiction. If the
information in these instructions is not followed exactly, a
fire, explosion or production of carbon monoxide may result
causing property damage, personal injury or loss of life.
The qualified service agency is responsible for the proper
installation of this kit. The installation is not proper and
complete until the operation of the converted appliance is
checked as specified in the manufacturer's instructions
supplied with the kit.
Broil burner injector (orifice) replacement
1. Remove oven doors from the cooker.
2. Unscrew 4 screws that are holding broil burner reflective sheet to oven ceiling.
3. Unscrew 1 screw that is holding broil burner on the front side while holding the burner.
4. Move the burner aside to reach the injector (orifice).
5. Replace the injector (orifice) according to the table of injectors (orifices) using 9/32 or 7 mm nut
driver.
6. Reverse the procedure to reassemble the burner.
EN 2
Publicidad
