LCD/PLASMA WALL BRACKET INSTRUCTION MANUAL
ART. 12/23000 Silver color ART. 12/23002 Black color
1. Technical parameter
Maximum load:
Size of flat panel TV:
Pitching angle: left & right ±20°; up & down: ±15°
Weight (without attachment):
Distance from wall:
2. Part list:
Please check the parts in the package compare with the following list.
Make sure all of the parts are in the package.
Never use defective parts.
Never replace part with different specification.
Note: Incorrect installation may cause injury!
No. Name of part
Material Amount
A
Self-tapping screws Standard part
B
Plastic anchor
Standard part
C
Ø 4 Flat Washer
Standard part
D
Ø 5 Flat Washer
Standard part
E
Ø 6 Flat Washer
Standard part
F
M4*8 Screw
Standard part
G
M4*12 Screw
Standard part
H
M5*8 Screw
Standard part
I
M5*12 Screw
Standard part
J
M6*8 Screw
Standard part
K
M6*12 Screw
Standard part
L
Standard part
Inner hexagon spanner S=5
M
Spanner S=13
Standard part
3. Installation and operation instructions
Note: Please read the instructions carefully before installation!
Step 1:
Use the wall dead plate as a templet to drill four holes
of 10mm diameter and 50mm depth in the vertical wall.
Then wedge four plastic concrete anchors into the holes.
ELCART DISTRIBUTION SPA via Michelangelo Buonarroti, 46 - 20093 Cologno Monzese (Milano) ITALY
Tel. ++39(0)2/25.11.73.10 Fax ++39(0)2/25.11.76.10 sito internet: www.elcart.com
La divulgazione dei dati contenuti in questa scheda è da ritenersi un servizio puramente informativo e non costituisce alcun vincolo da parte della Elcart in merito a prestazioni ed utilizzo del prodotto.
25 kg.
15"÷30"
1.1 kg.
65 mm
4
4
4
4
4
4
4
4
4
4
4
1
1
Step 2:
Put the wall plate on the wall, and then screw four
hexangular lag bolts into the plastic concrete
anchors to fix the Wall fixed frame on the wall.
Step 3:
Install the panel TV on the TV fixed plate with suitable
bolts selected from the parts bag.
At last adjust the azimuth of the panel TV to a suitable
position for watching.
4. Notes
(1) Choose the right place to install wall plate.
The bracket must be installed on solid concrete wall.
Make sure the wall can support 100kg weights up.
(2) Users should check and maintain the product frequently according to the use status to ensure the
flat panel TV works normally, safely and securely.
Please wipe joining parts with a dry cloth frequently.
Don't use it in rain or in moist environment.
Please check once two months if all bolts are secure or not.
IMPORTED AND DISTRIBUTED BY:
ELCART DISTRIBUTION SpA
VIA MICHELANGELO BUONARROTI, 46
20093 COLOGNO MONZESE (MI)
www.elcart.com - info@elcart.it
MADE IN CHINA
e-mail: info@elcart.it
ITALY