Beko VRS 82724 VB Manual Del Usuario página 8

3 Usage
3.1 Intended use
This appliance is intended for domestic use. It is
not suitable for industrial use.
3.2 Installation
3.2.1 Installation of upper and
lower bodies
1. Fix the upper body onto the lower body.
2. Rotate the upper body connection screw
clockwise to fix it.
3.2.2 Installation of the lower
body and the brush
1. Attach the brush to the suction nozzle.
8 / EN
3.3 Charging the appliance
1. Plug the adapter into the charging socket at the
back of the appliance and connect the plug to
the wall socket.
– The charging indicator will turn on and the
appliance will switch to the charging mode.
Meanwhile, the charging indicator will flash.
– The charging indicator will remain on after
charging is complete.
C
It takes up to 8 hours for the
appliance to be fully charged.
A
WARNING: Appliance cannot
be operated during the charging
process.
3.4 Operating the appliance
1. Push the control button forward and move it to
the desired level to operate the appliance (see
3.4.1).
2. Pull back the control button and move it to
"OFF" level to switch off the appliance.
3.4.1 Adjusting the suction
power
You can adjust the suction power by using the
control panel (3) on the appliance.
1. Use the "ECO" level to clean curtains, table
cloths and sofas.
2. Use the "CARPET" level to clean carpets.
3. Use the "TURBO" level to clean hard floors.
The charging indicator will be on
during operation. As charging level
C
decreases, these indicators will
gradually go off and the appliance
will stop working when all indicators
are off.
Cordless Stick Vacuum Cleaner / User Manual