HOTO QWSDT001 Manual Del Usuario página 3

02 How to Use
Focusing
Push the focus ring up and down to achieve
the effect of focusing and flooding.
Main Switch
Daily use: short press to turn it on (low light
mode by default). Short press again to adjust to
medium light mode; again to high light mode;
and again to shut it down. Repeat the operation.
During charging: Short press to turn it on to low light mode;
short press again to shut it down. Repeat the operation.
Strobe/SOS switch
Short press to turn on the strobe mode; short press again to switch to SOS mode;
short press again to shut down; Repeat the operation.
The strobe mode: in this mode, high-frequency flashing and strong light stimulation
can be used to disturb the line of sight of any potential perpetrators for defense.
SOS mode: in this mode, the flashlight automatically flashes with three dits, three
dats, and three dits to signal for help to the outside world.
Indicator status
Operating status
Ba ery is above 60%: green light is on.
Ba ery is between 30%-60%: orange light is on.
Ba ery is between 10%-30%: red light is on.
Ba ery is less than 10%: red light flashes. (A ention: A er the red light flashes for
a while, the main lamp of the flashlight will flash and be forced to turned off in
about 2 minutes. In that case, please charge the device.)
2