Whalen Trimble ECOM-TR30BK Manual De Instrucciones página 5

B
C
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Top Panel (A), the Side Panels
(B and C), the Bottom Panel (D) and the Bottom Front and Back Stretchers (G) using a Phillips
screwdriver.
3. Attach the Bottom Panel (D) between the Side Panels (B and C) with four 30 mm Wood Dowels (3) and
four Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement). Tap in with a rubber
mallet, if necessary.
Assembly Instructions
C
NOTE: It is very important to use a small amount of glue on both ends of dowels.
A
D
B
D
1
3
1
5
G
G
3
1
1
2