Publicidad
Idiomas disponibles
Idiomas disponibles
Fitting/removing the scouring pad attachments
The scouring pad attachments (coarse/fine pad)
8
holder
pad attachments
♦
Press the scouring pad attachment
Make sure that the scouring pad attachment
centrally on the pad holder
♦
To remove the scouring pad attachment
pull it off the pad holder
♦
Clean the pad holder
pad attachment
Fig. 4
Handling and operation
ATTENTION! PROPERTY DAMAGE!
►
Do not use abrasive cleaning agents. They could irreparably damage the
surface you are cleaning.
►
The hard bristles of the brush attachments
pad attachment
glass, vehicle paintwork, stainless steel, copper, wood, etc. Test the brush
attachments
use on an inconspicuous patch of the area you want to clean.
NOTE
►
Use the appliance with water. For more difficult stains use a mild cleaning
detergent. Apply the detergent directly onto the brush attachment
or the scouring pad attachment
ing before switching on the appliance.
►
After every use, clean the appliance and the used attachments
5
6
/
■
50
│
GB │ MT
. This is provided with Velcro to make fitting and removal of the scouring
5
6
/
quick and easy.
8
8
after use and before you attach another scouring
5
6
/
.
5
can scratch or damage sensitive surfaces such as
9
0
/
and the coarse scouring pad attachment
8
9
0
/
/
/
as explained in the section Cleaning and maintenance.
5
6
/
5
6
/
firmly onto the pad holder
5
6
/
8
(see fig. 4).
5
6
/
, lift one side a little and then
(see fig. 5).
Fig. 5
9
0
/
and the coarse scouring
5
6
/
and/or on the area you are clean-
are attached to the pad
8
.
is attached firmly and
5
before
9
0
/
SRB 4 A1
Publicidad
