Kingfisher FPHPC100 Manual De Instrucciones página 28

GB GB FPHPC100
IE
IE
O-Ring
Apply a drop of lubricant to the O-ring
at connector of the pressure hose (3)
(Fig. 23, A).
From time to time – according to the nature of your tap water – calcium deposits
form in the product and accessories. The strength of the deposits (and thus the
hardness of the water in your area.
NOTE: Use a mixture of water and citric acid or vinegar for
environmentally friendly!
>
in a suitable container, e.g. in a bowl.
> Lay the detachable accessories in the mixture.
> Leave the accessories in the mixture for approximately 12 hours.
> Then rinse the accessories with clear water.
Power cord
If the power cord is damaged, it must be replaced by the manufacturer, its
28
28
28
Care and maintenance
3
Fig. 23