Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER.
FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET
PROVIDED WITH THIS PRODUCT.
WARNING
Serious or fatal crushing injuries
can occur from furnitur
To prevent tip over
* Install tip over restraint provided
* Pace heaviest items in the lowest
drawers
* Unless specifically designed to
accomodate, do not set TVs or other
heavy objects on the top of this
product
* Never allow children to climb or
hang on drawers, door, or shelves
* Never open more than one drawer
at a time
Use of tip over restraints may only
reduce, but not eliminate the risk
of tipover
OPTION 1: Attachment into a wall stud ( Preferred method)
Using a stud finder, locate a stud in the wall. Place your unit against the wall, with the safety bracke
aligned in this location.
To make driving the screw easier, you can drill a 1/8" diameter pilot hole (3mm) through the safety
bracket into the stud.
Drive the screw through the safety bracket into the wall stud. Tighten the screw that was not fully
tightened in step 5
OPTION 2: A
Locate your unit where desired against a wall and mark the wall through the safety bracket, then
move your unit aside.
Drill a 3/16" diameter hole (5mm) into the wallboard. Ta p the wall anchor into the hole until it is
flush.
Tighten the screw that was not fully tightened in step 5.
Move your unit into loca
ameriwoodhome.com
For Masonry, Concrete, or other
wall materials:
Consult your local hardware store
for appropriate anchors to securely
attach the safety bracket.
34
hole
stud
wallboard
Publicidad
