Garant HCT 434342 Manual De Instrucciones página 23

2
1
0 0 0
4. Press to select the next digit.
SET
5. Press to select the next numerical value.
7.3.3. MODE (measuring the minimum, maximum, delta)
NodE
mm
i
The scale always indicates the current measurement value.
Switches the number display mode between normal (current measurement value), MIN, MAX and DELTA.
SET
- Briefly pressing resets the saved MIN/MAX value [CLEAR].
SET
- Pressing and holding
7.3.4. INTE (2 points mode)
IntE
Calibrates the device to the measured MIN / MAX values.
Calibration
1. Enter the preset value. See PRE (input of preset values) [} Page 22].
2. Select the [INTE] function.
3. Select -AMIN (DIR- and MIN mode) to measure the longest length.
4. Select +AMIN (DIR+ and MIN mode) to measure the length and distance.
5. Select +AMAX (DIR+ and MAX mode) to measure external and internal diameters.
6. Take the measurement taking into account the vertex.
7. Set the device using the [SET] mode and by pressing the
» Device has been set and is ready to take measurements.
Taking measurements
ü Take the desired measurements taking into account the vertex.
1. The numerical display saves and shows the measured MIN / MAX values.
» Before taking the measurement, reset the measurement value by briefly pressing the
7.3.5. TOL (tolerances)
toL
mm
 To define tolerance limits, enter the upper and lower deviations relative to the nominal value.
 Tolerance values can be displayed in the MIN, MAX or DELTA modes.
 To measure internal dimensions, the display colours of the tolerance indicator (red and yellow) can be swapped by as-
signing the input sequence for the tolerance deviations the other way round (upper deviation < lower deviation).
 If no tolerance limits have been defined, the display colours of the tolerance indicator will be deactivated.
Enter tolerances using the menu navigation
SET
Press to apply changes and return to the main display.
(>2s) records the current measurement value as the preset value.
button.
SET
button.
www.hoffmann-group.com
de
en
bg
da
fi
fr
it
hr
lt
nl
no
pl
pt
ro
ru
sv
sk
sl
es
cs
hu
23