Cressi Kinilau Manual Del Usuario página 23

Repairs
If you notice continuous deflation in the SUP, it's possible that there may be air loss
due to a leak. Most leaks can be repaired with the patches provided.
If the leak cannot be seen, you can find it by pouring a mixture of soap and water
over the area you suspect. If there is a hole, it will be revealed by small bubbles.
Once you have found the location of the leak, mark it with a felt-tip pen and make
sure you thoroughly clean and dry the patch area before you spread the glue.
Using sandpaper is also recommended to make the seal more effective.
When the area is prepared, deflate the SUP and cut out a circular patch with a
margin of 3-4 inches from the leak. Apply an adhesive such as MEK or equivalent
for PVC, following the manufacturer's instructions on quantity and drying.
Be careful to apply the patch slowly to avoid any air bubbles. Finally, leave the
SUP to dry in the open air for at least 24 hours before using it in the water again.
Warranty
In accordance with Directive 1999/44 EC, Cressi guarantees its products against
inherent and operating defects. To offer better service to its customers and
consumers and affirm the efficiency and quality of its manufacturing processes,
it has decided to extend the terms of the above warranty for a period of 90 days
from purchase on good operation and operating defects.
The Cressi warranty cannot be applied for:
• Normal wear resulting from use of the product
• Negligence and/or improper use
• Damage after sale incidental to use such as tears, scratches, and holes
• Modifications, repairs, or disassembly not authorized by Cressi and its
delegated personnel
The warranty is also issued solely to the original purchaser. Keep your payment
receipt, ID label, and this manual as proof of purchase and validity of the
warranty.
If a factory detect is found within the time limits set by the warranty, Cressi
reserves the right to decide whether to repair the product or replace it with the
same product or another of similar value (at Cressi's discretion).
Read and carefully store this manual. Follow all the usage instructions correctly,
and examine all equipment at the time of purchase. This warranty could be
deemed invalid if these instructions are not followed.
23