Publicidad
Idiomas disponibles
Idiomas disponibles
Installation steps:
Install the belt to the position shown in the figure,
1. The belt should be installed in the direction of the arrow in the figure
above.
2. The tooth pattern of the belt faces downwards and engages with the
gears.
3. Please pass the belt through the flat hole,
of the belt at one end
for easy pulling and tightening of the belt.
We suggest you don't cut off the extra belt after Step 4, this is good for
the future maintenance.
Step 3 Install the belt
note:
there should be an extra part
Pass the belt through
the flat hole
Publicidad
