Publicidad
ASSEMBLY ASAMBLEA
11)• To attach the toy bar, clip the hooks
on both sides of the toy bar to the
walker tray (Fig. 11). Do not use the
toy bar if it has been damaged or
broken.
• Para fijar la barra de juguetes,
enganche los ganchos que se
encuentran en ambos lados de la
barra de juguetes a la bandeja del
andador (Fig. 11). No use la barra de
juguetes si está dañada o rota.
TO FOLD WALKER
PARA PLEGAR EL ANDADOR
12)• To fold the walker, turn the button to
unlock and push it to release. Then
push the tray downward to the lowest
position (Fig. 12).
• Para plegar el andador, gire el botón
para destrabarlo y empuje para
liberarlo. Luego empuje la bandeja
hacia abajo a la posición más baja
(Fig. 12).
11
11
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
PLACING CHILD IN THE WALKER
CÓMO COLOCAR AL NIÑO EN EL ANDADOR
Clip On
Clip Activado
Fig. 11
• Always check the walker prior to each use to ensure that the seat is
• Before placing your child in the walker, please determine that your
• Adjust the seat height of the walker to the lowest setting. Place your
Fig. 12
• The baby walker can be used for 3 different heights. To adjust height,
• When the position has been selected, check that the safety button
ASSEMBLY ASAMBLEA
WARNING:
To reduce chance of child slipping out of
the seat, check that both feet of the child touch the floor.
Never carry walker with the child in it, as the child may
get hurt of slip out.
ADVERTENCIA:
de que el niño se resbale y se caiga del asiento, verifique que
ambos pies toquen el suelo. Nunca acarree el andador con
el niño en él, ya que este se podria lastimar o deslizarse y
caerse.
snapped in place and that the walker has no loose or broken parts.
Do Not use the walker if it is damaged or broken or missing parts.
child is developmentally ready for this type of product. Generally, your
child must be able to sit upright unassisted and have adequate neck
strength to exhibit very good control of his or her head. Typically, a
child should be at least 6 months of age to use this product. Infants
develop at different rates and you should discuss the use of a walker
with your pediatrician to ensure that your infant is ready.
child in the walker and check that both feet touch the floor. The child
should have only part of their weight on their feet when their legs are
straight. Adjust the walker height as needed as your child grows. Do
not adjust height with child in the walker. Discontinue using the walker
if your child attempts to climb out, reaches 30 pounds in weight or 32
inches in height, or when your child is able to walk unassisted.
remove baby from walker. Turn the safety button lengthwise and press
the safety button until the mechanism is released. Adjust to desired
height.
turned through 90 degrees to prevent the accidental release of the
mechanism. Always follow this procedure. Never use the baby walker
if the button is not in the sideways position. Important: Never change
the height when the baby is in the walker.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Para reducir las posibilidades
12
Publicidad
