Carlo Cracco Masterpro BGMP-9135 Manual De Instrucciones página 5

EN
Product Configuration
Exhaust Vent
Ceramic Plate
Control Panel
Power /TEMP/ Timer
lock
Display
Power/TEMP/Timer
Timer adjustment
Power Cord
Control Panel
Function
s
On / Off
07
After inserting the plug into the socket, a "Beep" will emit, the indicator above the [On/Off] key will
start to flash ,the display lights are activated shortly so they can be checked for proper
functioning. And the display shows C
Press On/Off, LED display will be on, LED display show ON.
2.1 Cooking Mode:
1. Power:
Press the [Function] key, display will show [1600] representing that the default power is 1600W. It
can be adjusted by pressing the [+] or [–] key to set the desired power. There are 10 power levels in
total(200W,400W,600W,800W,1000W,1200W,1400W,1600W,1800W,2000W). To cancel this mode, press
[Function] key to switch to temperature setting mode or [On/Off] key to stop the operation.
2. Temperature Celsius:
Temperature Celsius: Press the [Function] key twice, the display will show [180C]
representing that the default temperature is 180℃. It can be adjusted by pressing the [+] or [–] key to set the
desired Celsius.There are 10 Celsius levels in total(60 ℃ , 80 ℃ , 100 ℃ ,120 ℃ , 140 ℃ 160 ℃ ,180 ℃ ,
200℃,220℃,240℃). To cancel this mode, press [Function] key to switch to power setting mode or [On/Off] key
to stop the operation.
3. Power and Temperature indication would be switched in turn when the user press the [Function] key.
2.2 Timer Function:
User can set the cooking time when specific cooking mode is selected. Press the [Timer] key
once to access the timer function, the [TIMER] indicator will light up. Display will show the default
time [10], user can press [+] or [–] key to set for the desired time; [+] or [–] can adjust the minutes
by 1 minute. And if you hold the [+] or [–] key some time, the minutes could be adjusted by 10
minutes. The time can be adjusted from 1 minute to 240 minutes. After setting, user can press
[Timer] key once to confirm or wait until the display stop flashing. After the "Beep" signal, the
appliance will stop the operation and change to standby mode automatically when the end of the
countdown. To cancel this function, user can either press the [On/Off] key to return to standby
mode or hold the [Timer] key to resume the desired power or temperature operation.
2.3 Child Lock Function:
To prevent children from turning the cooktop on accidentally or changing the cooking settings,
press the LOCK button for a few seconds. the [ LOCK] indicator will light up. and the cooktop will
not respond to power level, temperature or timer changes. You can press the LOCK button either
when the cooktop is operating, or when it's turned off.
When the LOCK is on, the only button that will function is the ON/OFF button. To cancel the
children lockout, press the children safety button for at least 3 seconds, the light will go out and
the function is canceled.
3.Selection of Cookware
3.1 Material required:
² Steel, cast iron, enameled iron, stainless steel, flat-bottom pans/pots with bottom diameter
from 12cm to 26cm.
² So suggest to use the required pot, do not try to use other pot instead (especially pressure
08
EN